Weelye JR1958RX-2S 12V Controller Motherboard for Children's Electric Ride-On Cars

To ensure that the control box fits your car, follow these steps:

1. Open your broken electric ride-on car and inspect the control box. If the appearance of the control box is the same as the one you intend to purchase, it should fit your car.

2. Remote Control Instructions:

3. Step 1: Load the Remote Controller with two AAA batteries.
4. Step 2: Turn off the power switch on the vehicle.
5. Step 3: Hold down the "^▲" and "▼" keys for 3-5 seconds to start the match code. The first LED will flicker.
6. Step 4: Now turn on the vehicle's power switch. The red indicator lights will stop flashing, indicating the code has been successfully synced.

Key Functions: - "S" key: Adjusts the speed. 1 LED lit up is low speed, 2 LEDs lit up is medium speed, and 3 LEDs lit up is high speed. - "▲" key: Forward - "▼" key: Reverse - "◀" key: Left - "▶" key: Right - "P" key: Applies the brake (all LEDs will flicker).

WARNING: - Not suitable for children under 3 years old due to small parts that pose a choking hazard. - Load two AAA (1.5V) batteries according to the diagram. - Non-rechargeable batteries are not to be recharged. - Different types of batteries or new and used batteries should not be mixed. - Batteries must be inserted with the correct polarity. - Exhausted batteries should be removed from the toy. - The supply terminals must not be short-circuited. - The packaging must be retained as it contains important information.

The Wellye 2.4G JR1958RX-2S Control Box is compatible with the Child Electric Ride On Car JR1958RX-2S 12V Receiver. This control box has a slow start function, and no additional installation of a slow starter is required.

Please ensure that the purchased part has the same appearance as the original one to ensure compatibility with your specific children's riding toy. The remote control is not included with the control box, and it needs to be re-linked after installing the receiver. To do this, hold down the "^▲" and "▼" keys for 3-5 seconds to sync the remote with your car.

product information: