Upgraded Toy Car for Children: 12V 2.4G Bluetooth Receiver Accessories

How to Determine if the Control Box Fits Your Car

To ensure compatibility between the control box and your electric ride-on car, follow these steps:

1. Inspect the Control Box Open your malfunctioning electric ride-on car and locate the control box. Ensure that the appearance and configuration of the control box match those of the original part. If they are identical, the replacement should fit your car.

I. Initial Use (or Battery Replacement) Requires Frequency Matching

Follow these steps to synchronize the control box with your car:

Step 1: Install Batteries

• Insert two AAA 1.5V batteries into the designated slots, observing the correct polarity (positive and negative orientation). Close the battery cover securely. The indicator will flash three times to confirm correct installation.

Step 2: Activate Frequency Matching Mode

• Press and hold the frequency key (car select) for approximately 2 seconds. The indicator will begin flashing.

Step 3: Power On the Ride-On Car

• Turn on the power supply of your ride-on car. The indicator on the control box should turn off.

Step 4: Verify Frequency Matching

• If the indicator does not turn off, indicating unsuccessful frequency matching, switch off the car's power supply. Repeat steps 2 and 3 until the indicator turns off, confirming successful synchronization.

By following these steps, you can ensure that the control box is compatible with your electric ride-on car and properly synchronized for optimal performance.

product information: